Oneplus 9 leaked specifications and Official Back Panel Design

Oneplus 9 leaked specifications and Official Back Panel Design

The OnePlus 9 series is set to launch on March 23. OnePlus has teamed up with Swedish photography company Hasselblad this time to improve its camera game, and the phones have also been confirmed to include in-box chargers. In a new leak, the OnePlus 9 Pro and OnePlus 9 specifications were leaked online, giving us a good idea of ​​what these phones are likely to offer. Also, a recent trailer gives us an idea of ​​what the OnePlus Pro’s back panel might look like.

The new tweet was released through the OnePlus account, and while announcing the Hasselblad Mooring, it also shows us a flash of OnePlus 9 Pro at the end. The revealed rear panel of the phone quite corroborates with all past leaks. There is a rectangular module at the back that houses four sensors: two large ones positioned vertically and two small sensors side by side at the bottom. The Hasselblad logo is placed between the paired sensors. The phone has a matte silver finish on the back.

OnePlus 9 Pro Specifications (Expected)

Separately, MyDrivers first stained OnePlus 9 Pro ‘About Phone’ screenshots and OnePlus 9. These screenshots offer specifics details for the two phones ahead of their launch later this month. The screenshots show that the OnePlus 9 Pro can run on Android 11 software based on its proprietary OxygenOS skin. The Pro model is designed to feature a 6.7-inch Fluid AMOLED display with a 120Hz screen refresh rate. It is likely to run on the Snapdragon 888 SoC, along with 8GB of RAM and 128GB of storage. There could be more storage and RAM options announced at launch.

OnePlus 9 Pro model is tilted to feature a 6.7-inch Fluid AMOLED display
Photo credit: MyDrivers

On reaching the camera, the screenshots show that the OnePlus 9 Pro may have a quad camera setup on the back with a 48-megapixel main camera, a 50-megapixel secondary camera, an 8-megapixel tertiary camera and another sensor. 2 megapixels. Apart from this, the screenshot also has an image of the OnePlus 9 Pro’s front panel, hinting at its design. The phone is seen to sport a perforated cutout in the upper left corner with curved edges on both sides of the screen.

OnePlus 9 Specifications (Expected)

The image of the front panel of the OnePlus 9, seen in the screenshot, reveals that the phone may have a flat panel with a similar cutout in the upper left corner. OnePlus 9 is also designed to run on Android 11-based OxygenOS. It is reported to feature a smaller 6.55-inch Fluid AMOLED display with 120Hz refresh rate and is powered by the same Snapdragon 888 SoC. The screenshot suggests that the OnePlus 9 may include 8GB of RAM and 128GB of storage, but there should be more options at launch. It leans to come with a triple camera setup on the back with a 48-megapixel primary sensor, a 50-megapixel secondary sensor, and a 2-megapixel tertiary sensor.

hashantagari

hashan tagari Admin of technical hint. He writes about new technologies, smartphones, laptops, and technical hint content. He has frequently written about the Technology, smartphone, and PC industry and also has a knowledge of SEO. hashan is available at [email protected], so please send in your leads and tips.

Leave a Reply

Your email address will not be published. Required fields are marked *